Best Custom Roms For Samsung Galaxy S20 FE 5G [Android 12]

Download Custom Rom For Samsung Galaxy S20 FE 5G and Flash It – Today I will tell you through this writing (article) the easy way to flash Custom ROM in Samsung Galaxy S20 FE 5G. In this process, we will use TWRP Recovery (Custom Recovery). Before starting this process, I warn you that if your phone is Dead while flashing Custom Rom, then I will not have any responsibility. Here you will not be told any wrong procedure.

How To Root Samsung Galaxy S20 FE 5G Click here

Table of Contents

Quick Specification of Samsung Galaxy S20 FE 5G

5G Ready powered by Qualcomm Snapdragon 865 Octa-Core processor, 8GB RAM, 128GB internal memory expandable up to 1TB, Android 11.0 operating system, and dual SIM
Triple Rear Camera Setup – 12MP (Dual Pixel) OIS F1.8 Wide Rear Camera + 8MP OIS Tele Camera + 12MP Ultra Wide | 30X Space Zoom, Single Take & Night Mode | 32MP F2.2 Front Punch Hole Camera
6.5-inch(16.40 centimeters) Infinity-O Super AMOLED Display with 120Hz Refresh Rate, 1080 x 2400 (FHD+) Resolution “
4500 mAh battery (Non -removable) with Super Fast Charging, Fast Wireless Charging & Finger Print sensor
IP68 Rated, MicroSD Card Slot (Expandable up to 1 TB), Dual Nano Sim, Hybrid Sim Slot, 5G+5G Dual stand by
5G Ready powered by Qualcomm Snapdragon 865 Octa-Core processor, 8GB RAM, 128GB internal memory expandable up to 1TB, Android 11.0 operating system, and dual SIM.
Triple Rear Camera Setup – 12megapixels (Dual Pixel) OIS F1.8 Wide Rear Camera + 8megapixels OIS Tele Camera + 12megapixels Ultra Wide | 30X Space Zoom, Single Take & Night Mode | 32megapixels F2.2 Front Punch Hole Camera.

Advantages of Flashing Custom ROM in Samsung Galaxy S20 FE 5G

If you flash Custom Rom, then you can update in any Android version.
You can Customize your Smartphone in your own way.
You will have complete control over your Mobile Phone.

Disadvantages of Flashing Custom ROM in Samsung Galaxy S20 FE 5G

If your mobile phone is in Warranty then you will lose your Warranty.
If you make any mistake at the time of Flash to Custom Rom, then your phone can be Brick.
Your phone’s entire Security will be gone.
You will not get OTA Update on your phone.

Download Custom Rom For Samsung Galaxy S20 FE 5G and Flash It

This process is only for Samsung Galaxy S20 FE 5G. Do not attempt this process with any other smartphone.

There are 4 easy steps in this process.

Step 1: Unlock Bootloader On Samsung Galaxy S20 FE 5G

Step 2: Flash TWRP Recovery on Samsung Galaxy S20 FE 5G

Step 3: Flash Custom ROM on Samsung Galaxy S20 FE 5G

Step 4: Install Open GApps On Custom ROM

Pre-Requirement for Samsung Galaxy S20 FE 5G

You charge your phone more than 75%.
A PC / Laptop will be required.
You have full Backup of your Mobile.
You Carry the Original USB cable of the Samsung Galaxy S20 FE 5G.
SDK Platform-Tools Application for Computer.
Samsung USB Driver for Computer.
Samsung Galaxy S20 FE 5G TWRP Recovery File.
Odin Flash Tool For Computer
The bootloader of this phone should remain unlocked.
Custom Rom For Samsung Galaxy S20 FE 5G.

Download Link

Step1:- Unlock Bootloader on Samsung Galaxy S20 FE 5G

Enable Developer Option in Samsung Galaxy S20 FE 5G.

Settings → About Phone → Build Number You have to click on the build number 7-8 times and after that, your developer mode will be enabled

Now you have to enable OEM Unlock in your Samsung Galaxy S20 FE 5G

(Settings →Developer option→OEM Unlock)

You have to do the further process on your PC / Laptop.

First of all, you have to install Samsung USB Driver on your pc.
Make sure in your computer that ADB Fastboot Drivers are installed in your computer.
Now you have to download the SDK Platform-Tools and install it on your PC / Laptop.
Now you have to reboot your phone in Fastboot Mode.

First of all boot your phone Recovery Mode> Switch off> After switch off> Press Hold Power Button + Volume Down. Now your phone will be booted in Recovery Mode. Now you have to click on the third option, ‘Enter Fastboot.

After this, you have to go to the Command Prompt from the SDK Platform Tools file.

You have to click the Shift Key + Right Mouse Button on the empty space in your computer’s SDK Platform Tools folder.

Above you have to type CMD in the location containing the file. and Press Enter

Now you have to connect your phone to the computer via USB cable in Fastboot Mode.

(Switch off your phone and after switching off, press the Volume UP + Power button simultaneously)

After this, you have to type the command on your PC / Laptop in this way.

1 command :- ‘adb devices’

2 command:- ‘adb reboot bootloader’

3 command :- ‘fastboot devices’

4 command :- fastboot oem unlock

5 Command :- ‘fastboot reboot’

Now the bootloader of your Samsung Galaxy S20 FE 5G will be unlocked.

Step 2:-Flash TWRP Recovery on Samsung Galaxy S20 FE 5G

First of all, you have to install the ODIN flash tool on your computer.
Open the Odin flash tool
Make Sure in Your Phone USB Debugging is Enable
Now reboot your phone in download mode and connect it with USB via computer.
Go to AP in Odin App and select TWRP Recovery file of Samsung Galaxy S20 FE 5G.

After this, click on the Start button.

This process will take you a few seconds.

After some time, the TWRP Recovery file will be installed in your Samsung Galaxy S20 FE 5G. Above you will find the message of Reset or Pass.
After this, your phone will be Automatic Reboot.

Step 3. Flash Custom ROM on Samsung Galaxy S20 FE 5G

After installing TWRP Recovery you have to boot your phone into TWRP Recovery.

Now switch off your phone and then press Power Button + Volume Down (-) simultaneously.

Now you have to click on Wipe Option in your TWRP Recovery.
After going to the Wipe Option, click on Advanced Wipe.
After moving to Advanced wipe, Dalvik Cache, Cache, System, Data have to select them and slide Swipe to Wipe.
After sliding Swipe to Wipe, you have to click on Home Button.

After clicking on Home Button, you have to click on Install and there you have to select the file of Custom Rom.
After selecting the Custom ROM, Swipe to Confirm Flash

This process can take about 5-10 minutes, if the size of your Custom Rom file is more then it may take more time.

After Custom Rom Flash, you have to click on Reboot System.

Step 4. Install Open GApps On Custom ROM

This process for guys whose Custom ROM does not have open GApps.
First of all, you have to Download Open GApps File for your phone.

 Open Gapps :- Download

After rebooting in TWRP Recovery, click on Install.
After clicking Install, you have to select Open GApps File and slide Swipe To Confirm Flash.

This process can take about 4 -7 minutes, if your Open GApps file size is more then it may take more time.

After Open GApps File Flash, you have to click on Reboot System.

Now your phone has completely flashed Custom Rom. I hope you have understood this process.

Thank you for taking the time to this website.

I hope that you have understood this process, if you have received any help from it, then share this hopeful process with your friends. If you have any questions, then comment below. Thank you!