Download TWRP Recovery 3.5.2 For Motorola Edge 30

Download TWRP Recovery 3.5.2 For Motorola Edge 30 -Today, through this article, I will show how to install the TWRP Recovery files in Motorola Edge 30. Whatever process will be shown here, the simple language will be English. If your phone is dead while flashing the TWRP Recovery file then it will be your responsibility. Here you will not be told any wrong procedure.

Advantages of TWRP Recovery Flash in Motorola Edge 30.

  • Can easily flash Custom Rom.
  • Root the Android device easily.
  • You can take a backup of Stock Rom on your phone.
  • You can Overclock your phone.

Disadvantages of TWRP Recovery Flash in Motorola Edge 30.

  • After flashing TWRP Recovery your phone’s Warranty will end.
  • If you make any mistake while flashing TWRP Recovery, then your phone can be bricked.
  • When you flash your phone’s TWRP Recovery, the OTA update will stop coming to your phone at the same time.
  • After flashing TWRP recovery all the data on your phone will be deleted.

Download TWRP Recovery 3.5.2 For Motorola Edge 30

Download TWRP Recovery 3.5.2 For Motorola Edge 30

There are 2 easy steps in this process.

Step 1. Bootloader Unlock on Motorola Edge 30.

Step 2. Install TWRP Recovery on Motorola Edge 30.

Pre-Requirement for Motorola Edge 30

  • You charge your phone more than 75%.
  • A PC / Laptop will be required.
  • You have full Backup of your Mobile.
  • You Carry the Original USB cable of Motorola Edge 30.
  • SDK Platform-Tools Application for Computer.
  • Motorola USB Driver for Computer.
  • Motorola Edge 30 TWRP Recovery File.
  • The bootloader of this phone should remain unlocked.

Download Link

SDK Platform Tool Download
ADB & Fastboot Driver Download
Motorola USB Driver Download
TWRP Img File Download
TWRP Zip File Download

Step 1. Bootloader Unlock on Motorola Edge 30

  • First of all, check the latest Software Update on your mobile.

(Settings → About → Software Update )

  • Now you have to enable the Developer Mode of your phone.

After going to Settings-About Phone → Baseband & Kernel → Build Number, click on it 7-8 times. And after this, your Developer Mode will be enabled.

  • Now you have to Enable USB Debugging and OEM Unlock of your phone.

Settings → Additional setting → Developer Options → Enable USB Debugging and OEM Unlock.

You will have to do further processing on your PC / Laptop.

  • First of all, you have to Install Motorola USB Driver on your computer.
  • Make sure in your computer that ADB Fastboot Drivers are installed on your computer.
  • Now you have to download SDK Platform Tools and install it on your PC / Laptop.
  • After this, you have to go to the Command Prompt from the SDK Platform Tools file.

You have to click the Shift Key + Right Mouse Button on the empty space in your computer’s SDK Platform Tools folder.

ADB Command

Above you have to type CMD in the location containing the file.

ADB Command

SDK Platform Tools

  • Now you have to connect your phone to the computer via USB cable in Fastboot Mode.

(Switch off your phone and after switching off, press the Volume Down + Power button simultaneously)

  • After this, you have to type the command on your PC / Laptop in this way.
  1.  fastboot oem get_unlock_data

motorola bootloader unlock

  • By inserting this command you will get some code. And copy these codes and submit them on this Motorola website.

motorola bootloader unlock

  • Go to this website and submit the copied code. While submitting the code, remove all the letters inside the bracket in the code.. (Make sure you have an account on this website. If you do not have an account, create one)

Motorola Bootloader unlock

  • After submitting the code, another Unlock code will go to your register email and that code has to be copied.

Motorola Bootloader unlock

  • After the code arrives, you have to type the command in this way
  1. fastboot oem unlock [your code ](You have to type this command Two Time)
  2. fastboot reboot
  • Now your Bootloader of Motorola Edge 30 has been unlocked.

Step 2. Install TWRP Recovery on Motorola Edge 30

  • Now you have to download the TWRP Recovery file for Motorola Edge 30 on your PC / Laptop.
  • Move this TWRP Recovery file to SDK Platform Tools.
  • The TWRP Recovery file has to be Renamed with twrp.img by this name.
  • Now you have to go to Command Prompt on your computer.

You have to click the Shift Key + Right Mouse Button on the empty space in your computer’s SDK Platform Tools folder.

  • Then you have to boot your phone in Fastboot Mode.

(Switch off your phone and after switching off, press the Volume Down + Power button simultaneously)

  • After this, you have to connect your phone to the computer via USB cable.
  1. Command:- adb devices 
  2. Command:- fastboot flash twrp.img 
  3. Command:- fastboot reboot 
  • After flashing TWRP.img you have to flash the TWRP zip file with the help of a pen drive.
  • After this, TWRP Recovery Mode will be installed on your phone.

 

Thank you for taking the time to this website.

I hope that you have understood this process, if you have received any help from it, then share this hopeful process with your friends. If you have any questions, then comment below. Thank you!

Leave a Comment